This Humax 5400 DiSEqC motor settings is without most Irdeto2, Videoguard, Nagravision A
and Power Vu channels ... why? because most of users don't have original cards or 
cam's for that channels and this settings working much better with not to many channels!
If you have some original card for some of missed provider you can add that's channels in 
some settings editor or with Humax channel search function.

- This settings have corrected satellite positions according to new ToH 3.0 firmware
- Some channels are name protected
- Some channels working OK only with my PMC-Table or ECM-Fix

For put my motor settings in your combination who can be with fixed antenna (DiSEqC switch)
with 1,2 or more LNB's or with DiSEqC motor do this:

Easier way is with SetEditOAK3 ... last version is 0.46 ... look this links:

http://www.setedit.de/startup_d.html
http://www.setedit.net/SetEditOAKV3e_installation.exe

1. Open your last working settings
2. Under 'File' menu press 'Save LNB + menu configuration'
3. Open my last settings (in this file)
4. Under 'File' menu press 'Load LNB + menu configuration'
5. Under 'File' menu press 'Write into receiver'
6. Enjoy in new settings 

Above operations you can do also with unregistered copy of SetEditOAK3 :) With above operation
you have your working DiSEqC and Humax menu with this new channel settings. Other edit operations
you can do with your favorite editor (Humbox, Human, xOak etc).


ATTENTION: For new HIC 1.05.00 + CAM ToH 3.2 + HoT EMU 1.2 best always upload settings in Humax 
           with Human Settings Editor v.0.9.9.1 beta (included in HoT EMU 1.2 zip) ... other 
           programs erase your RAM keys and some other menu settings!


That's all


Enjoy


Xamuh
