Hardware:  Humax IRCI-5400(Z) patched with HIC 1.05.00 + CAM ToH 3.2 + HoT 1.9
           Null-modem cable

Software:  PMC-EDIT-ToH20.exe 

If you need some more information about how to upload PMC-Table look there:

http://uk.internations.net/delphy/#Firmware

This PMC-Table (Xamuh_PMCtable_CAM_ToH3.2_EMU1.9_1608.csv) is for:

- All Viaccess and Seca providers with known keys
- All ORF channels (forced 1762 CAID)
- Multivision's and some film TPS channels
- Prevent conflicts from some Irdeto 0602 channels
- Fixed English/Polish audio for TV1000 East and ViaSat Explorer East on Sirius
- Sky News Mosaic channel on Astra 2
- Fixed some TVN channels (13E)
- Fixed Mezzo (19.2E)
- Fixed All Sky Italia ch. (13E)
- Fixed All Digital+ (Taquilla's) ch. (19.2E)


After this PMC-Table you can see Sky News Mosaic on Astra 2 (28.2E). This PMC-Table 
prevent Humax Auto Update Video-Pid of Sky News Mosaic channels.

-----------------------------------------------------------------------------
Channel Name         ChID  APID  VPID  PCRPID  PMTPID   Freq  Pol  FEC Symbr
-----------------------------------------------------------------------------
Sky News Mosaic x8   4707  2315  2312  2304    257      12207   V  2/3 27500
Sky News Mosaic x4   4707  2318  2313  2304    257      12207   V  2/3 27500
Sky News Mosaic x4   4707  2316  2314  2304    257      12207   V  2/3 27500


ATTENTION: - This PMC-Table working ONLY with HIC 1.05.00 + CAM ToH 3.2 + HoT 1.9

           - This PMC-Table working with this channel settings:

             Antenna  1 = Astra (19.2E)
             Antenna  2 = Hotbird (13E)
             Antenna  6 = Sirius (5.0E)
             Antenna 25 = Astra 2 (28.2E)

If you have some other settings - You can exchange Ant-ID in PMC-Editor! 


--------------------
 CAID Preselect menu
--------------------

  With an option in the ToH-Config menu you can control, if the CAID is
  taken from card as normaly or if it should be taken from the PMCT.
  You can do the following selections with the "CAID Preselect":

	CARD|EMU+K|EMU+S|EMU|CAS1|CAS2|CAS3|CAS4|CAS5|CAS6

  There are the following new entries in the PMCT:

  EMU+K 0000 1800 1762 0500 0100 0000 0000 => For Emulator + CAM with Conax card
  EMU+S 0000 1800 1762 0500 0100 0B00 1702 => For Emulator + Premiere card sharing
  EMU   0000 1800 1762 0500 0100 0B00 0000 => For Emulator default use 
  CAS1  0000 1800 1762 0500 0100 0B00 0000 => For Emulatorek/Wallbanger auto switch with SkyCrypt cam in
  CAS2  0000 1801 1722 0500 0100 0B00 4A60 => For Nagra Aladin and SkyCrypt testings
  CAS3  0000 1800 1762 0500 0100 0000 0000 => For people with SkyCrypt and Conax supported CAM's
  CAS4  0000 0500 1762 0100 0604 0606 0608 => For people with Nagra supported CAM's or Irdeto 2 test
  CAS5  0000 0D00 0D01 0D02 0D03 0D04 0D05 => For Cryptoworks test
  CAS6  0000 0918 0960 0961 09A4 09D0 0E00 => For NDS Videoguard test

  This entries have to be set in the CSV file:

  EMU+K,0028,0000,1800,1762,0500,0100,0000,0000
  EMU+S,0028,0000,1800,1762,0500,0100,0B00,1702
  EMU  ,0028,0000,1800,1762,0500,0100,0B00,0000
  CAS1 ,0022,0000,1800,1762,0500,0100,0B00,0000
  CAS2 ,0023,0000,1801,1722,0500,0100,0B00,4A60
  CAS3 ,0024,0000,1800,1762,0500,0100,0000,0000
  CAS4 ,0025,0000,0500,1762,0100,0604,0606,0608
  CAS5 ,0026,0000,0D00,0D01,0D02,0D03,0D04,0D05
  CAS6 ,0027,0000,0918,0960,0961,09A4,09D0,0E00

  After changig the option for CAID, you have to do a CAM reset. (for example 0+RCL)
  This is only one example for CAID settings ... You can change that for your wish :)


Enjoy :)


Xamuh
