cs-client activeren in hydra phoenix

[loewe fan]

goede middag,

 

kan iemand mij misschien vertellen hoe ik de cs-client moet activeren bij de hydra phoenix?

bij de pli 29-11 hoef ik alleen maar te kiezen en op ok te drukken in te vullen en draaien maar.

bij de phoenix krijg ik een bericht dat het op dit moment niet mogelijk is.

 

wie kan mij helpen.

 

loewe fan.

[zoekende]

INSTELLINGEN

 

 

# Sample Romu config file

# Copy this file to /var/etc/romu.cfg

# If client and server both have card selected, the card is disabled on client.

# Zap-times with card are faster (2 times) when client/server model is used

# This is because the client process restart by every zap and needs to query

# the card for providers.

 

# This sample is the best config to run on 1 dreambox.

 

[client]

# The port number the server is listening on

port = 2500

 

# server ip-address or name

server = ip-adres server !!!!!!!!!!

 

# mode can be emu=1 net=2 card=4 (7=emu+net+card, 5=emu+card enz.)

mode = 3

 

# Set to true if client needs to send updates over internet IP adresses

# LAN ip-adreses (192.168.x.x 172.16.x.x 10.x.x.x) are always used for AU.

au_internet = false

 

 

[server]

port = 2500

 

# mode can be emu=1 card=4 (5=emu+card)

# mode 2 (net) does not work for server.

mode = 5

 

#With phoenix_dev you can get a seca2 card working on a linux PC

#with phenix interface. Do not supply phoenix_dev on dreambox.

#phoenix_dev = /dev/ttyS0