radegast conf

[jason]

wie kan mij vertellen wat er in deze conf file niet goed is want ik krijg mijn db als client niet aan de gang op mijn eigen server.

 

 

#

# radegast.conf

#

# $Id: radegast.cfg,v 1.30 2004/07/23 16:20:52 kzz Exp $

#

# Sample of configuration file for radegast project

#

 

# ---------------------------------------

# Client configuration (for rdgc or camd)

# ---------------------------------------

[camd]

#pmt = own|file|socket

pmt = file

#debug = 0

 

# PMT table magic

#ecm caid remove = caid:provid

# * Filter specified ECM stream off. Usefull when simulcrypt

# is used and is known that some of the ECM stream is unsupported

# (ie. when new cards are testing but not already at customers)

ecm caid remove = 1801:0000

#ecm caid remap = caid:provid:pid-old:pid-new

# * Remap ECM pid for some service. Usable

# - when provider sends fake ECM PID entry

# - when provider uses the same DW for more services

#ecm caid priority = ciad:provid (unimplemented)

#ecm caid fixed dw = caid:provid:dw_16hex (unimplemented)

 

dvb api = 2

# * DVB API version: 2 or 3

descr mode = v3api

# * Descrambler feeding method: off, v2api, file, v3api

 

demux index = 1

# * index = 1 for working timeshifting/recording

# on dreambox dm7000

# = 0 for dm5600, dm500 and dragon

 

#ecm flood lock = 5

#ecm flood release = 200

 

# -------------------------------

# Server configuration (for rdgd)

# -------------------------------

[rdgd]

#log file = /hdd/radegast.log

ecm op mode = both

emm op mode = both

# * filter EMM suport based on remote/local access. And possibility to disable

# EMM support at all

 

ecm preffer = card

# * ECM processing order (card or softemu)

 

#emu mode = on

# * on/off softemu mode

 

#card mode = on

# * on/off card mode

 

sw cache = 3

ca cache = 3

# * cache level for softemu and card mode. 0 = cache off

 

#log level = 0

 

net port = 666

# * TCP port waiting for remote connection. As (by default) this port

# can handle _ONLY_ONE_ (!!!) remote connection the main use is

# for connecting netpilot to the rdgd. But in "2-boxes only"environment

# this port can be used directly for serving one remote connect.

# In this case, howewer, "net ip" has to be changed to real IP address

# of the box.

 

#net ip = 127.0.0.1

# * IP address where rdgd is waiting for network connection.

# By default, only connect from the same box is allowed.

 

local cmd pipe = /var/tmp/rdgd.cmd

 

#sottemu

softcam file = /var/keys/SoftCam.Key

conax file = /var/keys/Conax.Key

autoroll file = /var/keys/AutoRoll.Key

mkeys file = /var/keys/MK.Key

 

#slots

atr timeout = 2000

# * Timeout waiting for ATR. If rdgd has problems detecting card type

# then this value has to be increased.

# Warning: Using too high value may corrupt a normal rdgd processing!

# Use with caution.

 

sc card detect = 1

# * Possibility of use normal card detection mechanism.

# Warning: Usable only on newer boxes or harware (sc resistors) patched ones!

 

readers = 2

 

reader 1 type = dream

# * Card reader type: dream, dbox, dbox_6mhz, phoenix, pcsc, dragon

# dream - DB7k compatible sci_drv.o

# dbox, dbox_6mhz - dbox2

# phoenix - phoenix (3.57 for all but Ird/Beta when 6.0MHz)

# dragon - triple-dragon

#

reader 1 name = /dev/sci0

# * Card reader device name

#reader 1 timeout = 1000

# * I/O timeout

#reader 1 speed = 12768

#the speed setting sets CUSTOM baud rates as the default. A value

#of 0 or this line commented out uses the standard baud rate settings

#reader 1 log mask = 0

# * simple logger on/off

#reader 1 nagra boxkey = 1122334455667788

# * nagra box key value

#reader 1 blocker = full|off|ua,sa,ga|ua,sa|ua,ga|sa,ga|ua|sa|ga

# * blocker mode: full, off, ua, sa, ga

# full - full blocker, no any EMM are passed

# off - without any blocker, all EMMs are passed

# ua - user addressed EMMs are blocked

# sa - shared group addressed EMMs are blocked

# ga - global addressed EMMs are blocked

reader 1 blocker = off

#reader 1 special = tunnel

# * special features, like tunneled cards (ie. conax tunneled over via)

 

reader 2 type = sc

reader 2 name = /dev/sci1

reader 2 timeout = 1000

reader 2 log mask = 0

reader 2 parity = E

#reader 2 nagra boxkey =

reader 2 blocker =off

 

#reader 3 type = phoenix

#reader 3 name = /dev/tts/0

#reader 3 parity = E

#reader 3 timeout = 1000

#reader 3 log mask = 0

#reader 3 nagra boxkey =

#reader 2 blocker =

 

#remote boxes

net routes = 2

#net route i = caid:ident:ip-or-domain:socket:flags:username:password:keyhex

#examples:

net route 1 = 01:0:10.0.0.158:20001:0:::

net route 2 = 17:0:10.0.0.158:20001:0:::

 

net timeout = 10000

# * Timeout for network I/O operations when rdgd

# acts as client

 

#max clients = 1

# * Possibility to enable remote multi-access

# to rdgd. But note: without authentication

# and encryption support !!!

 

#internal delay = on

# * internal delay = on|off

# When 'on' then no system's x-sleep calls is used

# Whith 'off' there should be lower system load, btw

 

#external app = /path/to/application

# * external app managemment

# if died then is invoked again

# (usable for ex. for starting netpilot

 

# ----------------------

# NetPilot configuration

# ----------------------

[netpilot]

shared port = 678

 

#Popups from Netpilot to enigma

# Address is localhost by default

# port should be 80 (the HTTP port of enigma)

enigma address = 127.0.0.1

enigma port = 80

show popups = off

 

#shared info file = /var/tmp/shared.info (unimplemented)

 

authentication = on

 

stat time = 1

# * transaction statistics

# statistics interval in minutes (0 = disable)

 

#hosts allow = 192.168.1.1, 192.168.1.10

#hosts deny = 192.168.1.1, 192.168.1.10

# * Possibility to filter unfriendly connections

# Note: if 'allow' is used then 'deny' is not tested _AT_ALL_!