Gbox-upper +lower slots + com poort in DB700S ?

[MAJOOR]

Hoi jongens,

 

Hoe krijg ik de twee interne slots + com poort via phoenix cardlezer in mijn DB7000S met Gbox emu werkend ?

Wat staat er verkeerd in mijn cfg

 

Hier mijn cfg:#gbox config file

 

# Trace/Debug

# xx yz ; xx=00 no konsole output

# xx yz ; xx=01 konsole output

# xx yz ; y=0 debug output (don´t use)

# xx yz ; y=1 no debug output

# xx yz ; z=0 ouput to konsole

# xx yz ; z=1 output to /var/tmp/debug.txt

# xx yz ; z=2 Output to UDP (to capture with gboxt)

Z: { 01 01 } 192.168.1.7 8024

 

# Task type

# 00 ** normal mode gbox mode (no season, use Multicam instead)

# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ

# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ

# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z

# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z

# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z

# ** *1 Com port to use for season emulatiom (1 or 2)

# ** 0* Use CTS fr RST detection

# ** 1* Use DCD fr RST detection

# ** ** 9600 = Baudrate to be used (working only on dbox2)

W: { 00 01 } 9600

 

#gbox working mode

# 00 pure Emu

# 01 pure SoftCam (when card inside), Emu (when no card inside)

# 02 pure Net Client

# 03 Mixed mode !!!!! always use this !!!!!

G: { 03 }

 

# Display ECM messages on Konsole

# 00 don´t show any ECM´s

# 01 show only valid ECM´s

# 02 show valid and bad ECM´s with complete data display

C: { 01 }

 

# Display EMM messages on Konsole

# 00 don´t show any EMM´s

# 01 show only valid EMM´s

# 02 show valid and bad EMM´s with complete data display

# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log

M: { 01 }

 

# AutoUpdate

# 00 is ignored (default)

# 01 enable AU

# 02 Auto AU !!!!! always use this !!!!!

A: { 01 }

 

# Key update

# 01 update only new keys, default setting

# 02 update all keys (used for valid PMK checking)

U: { 01 }

 

# Hash pids

# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF

# 01 hash only pids with implemented algos and available keys !!!!! always use this

H: { 01 }

 

# Key files folder

# 00 keyfiles in /var/keys

# 01 keyfiles in /var/tmp

T: { 00 }

 

# On Screen Display for the Multysystemcam on com1/com2

# 00 No OSD (default)

# 01 display Smartcard messages in Neutrino

# 02 display Smartcard messages in Neutrino new nhttpd format

# 03 display Smartcard messages in Enigma

O: { 00 } 192.168.1.7

 

# Logger and NET-mode UDP port Init

# 00 do not init UDP port

# 01 Init UDP port for IP, port, UDP

L: { 00 } 192.168.1.7 8017

 

# *x ** ; x = device nummber to be used (0= default)

# D* ** ; force use of /proc/bus/gtx for cw write operations

(in the dbox2 the gbox writes directly the CW´s, 00 is the

recommended mode ! No drivers are required) use D* ** ONLY if

you have Problems. 0* ** should be prefered !!!

# F* ** ; write CW´s in both devices (used for PVR in STB04xxx devices)

# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)

# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)

# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)

# ** *z ; z=0001b (0x*1) use com1 as Multicam

# ** *z ; z=0010b (0x*2) use com2 as Multicam

# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams

# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams

# ** *z ; z=0100b (0x*4) invert CTS detection on com1

# ** *z ; z=1000b (0x* invert CTS detection on com2

# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)

V: { F0 30 }

 

# =============================================================================

# extra options to override default seting in case you expirience Problems,

# normaly these setings are not required.

#

# cpu, api, cw write method

#

# 00 auto

# 01 80X86

# 02 MPC823

# 03 IBM STB04xxx

# 00 auto

# 01 ibm

# 02 api2

# 03 api3

# 00 cw write style = use internal routine (only dbox2)

# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)

# 02 cw write style = CA_SET_DESCR type2

# 03 cw write style = CA_SET_DESCR type3

# 04 cw write style = 16 byte /proc/bus/gtx

# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0

# xx write cw in 1st device with index=xx

# yy write cw in 2nd device with index=yy

# 01 means with .index=0 (default)

# 02 means with .index=1

# 03 means with .index=0 and .index=1

# .. any bitwise combination ...

# FF means with all 8 indexes (0-7)

#J: { 01 00 00 01 01 }

 

# Files, folders, devices

# folder/device comment

#

#F: { 01 } /var/tmp/pmt.tmp // pmt file

#F: { 02 } /var/tmp/emm.info // key update log file

#F: { 03 } /var/tmp/ecm.info // ecm info file

#F: { 04 } /var/tmp/atack.txt // atack info file

#F: { 11 } /var/keys // folder for config files

#F: { 12 } /var/tmp // folder for temporary file

#F: { 13 } /var/tmp // folder for keyfiles

#F: { 21 } /dev/dvb/adapter0/ca0 // ca device

#F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device

#F: { 23 } /dev/dvb/adapter0/demux0 // demux device

#F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)

#F: { 41 } /dev/sci0 // STB04xxx slot1

#F: { 42 } /dev/sci1 // STB04xxx slot1

F: { 43 } /dev/tts/0 // rs232 com1

#F: { 44 } /dev/tts/1 // rs232 com2

 

# For overclocking freaks, Clocking internal STB04xxx slots with:

# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz

# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz

# The Dream has not a clean clock signal, some cards that are sensitive will

# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.

# On other STB04xxx recievers the same cards work with 6.30MHz

#

F: { 51 } 02 // irdeto

F: { 52 } 03 // seca

F: { 53 } 03 // viaccess

F: { 54 } 03 // nagra

F: { 55 } 03 // crypto

F: { 57 } 03 // conax

F: { 58 } 06 // nds

F: { 43 } /dev/tts/0 // rs232 com1

 

# new options in gbox_cfg Vers. 2.21

 

 

# force a name change of the season or sssp rs232 device

#F: { 45 } /dev/ttyS1

 

# set stay alive ping time in seconds (default is 300)

F: { A0 } 300

 

 

# disable direct serial port I/O access on 80x86cpus (win and linux)

# direct port i/o is used to set unusual Baudrates, if you want to

# a 3.579MHz card in a 6.000MHz reader etc ...

#

# Enabled (A1=0) is the default setting, has always been !!!

#

# Disable (set to 1) it ONLY if you have problems with ioperm or you want

# to use a usb-to-rs232 smartcard reader

#

F: { A1 } 1

 

 

 

Alvast bedankt,

 

MAJOOR

[Ibocan-power]

V: { 35 }

[tfh]

V: { F0 30 }

moet worden

V: { F0 33 }

 

F: { 43 } /dev/tts/0 // rs232 com1

moet (denk ik) worden

#F: { 43 } /dev/tts/0 // rs232 com1

[flugel]

Hoe sluit je die aan ?

 

Ik bedoel met welke kabel?

 

usb of via de compoort?

[MAJOOR]

Citaat:

V: { F0 30 }
moet worden
V: { F0 33 }

F: { 43 } /dev/tts/0 // rs232 com1
moet (denk ik) worden
#F: { 43 } /dev/tts/0 // rs232 com1

@tfh

V: { F0 33 } ingevoerd ,beide slots werken.

Maar de rs232 com1 werkt NIET voor een phoenix cardlezer , is er een ander instelling die moet veranderd worden ?

Alvast bedankt,

MAJOOR

[rongogo]

Heb je compoort niet openen wel aangevinkt in je dream menu ?

 

Ik bedoeld seriele poort niet openen :-)

 

 

 

grtz rgg

[MAJOOR]

Citaat:

Heb je compoort niet openen wel aangevinkt in je dream menu ?



grtz rgg

@rongogo

compoort aangevinkt en V: { F0 35 } ingevoerd alles OK

MAJOOR