TV Orion TV794: Hoe service mode activeren?

[ADC]

Ik heb rastereindtrap moeten vervangen maar nu is de vertikale amplitude iets te groot en zou die graag willen bijregelen maar weet niet hoe in service mode te geraken.

 

Iemand een idee?

 

Alvast bedankt

[boarder]

Hieronder de procedure:

 

 

1. Switch on appliance while holding down MENU key at cabinet controls until red LED lights up. 2. Release MENU button at cabinet and press standby key on RC. 3. The appliance will default to programme 1, or to AV1 if pin 8 of SCART 1 is connected to a voltage of ±12V. It is therefore important to make certain that the test signal needed to make adjustments are available either on programme 1, or on SCART 1 input, as selection of sources is not possible thereafter in SERVICE mode. 4. The functions that can be adjusted are selected using P+ and P- keys on RC and adjustments are then made with volume ± keys.

[ADC]

hartelijk bedankt,

werkt,

maar

weet ge toevallig hoe ge de waarden vastlegd ( store)?

[boarder]

Probeer dit eens...

Once all the necessary adjustments have been made, press TV or MENU OFF on RC to save all changes and return appliance to normal operating mode.

 

 

Succes, Boarder

[ADC]

Bedankt boarder.

Was inderdaad de TV knop.

 

nogmaals bedankt